Flowmeters

Electromagnetic insertion flowmeter

  HydrINS 2 with Display                 

Riche of its long experience with thousands of HydrINS flowmeter working throughout the world, Hydreka is proud to introduce its new range of insertion flowmeter : HydrINS 2 with display (IDU), for real time data.
The new Hydrins 2 can be supplied in battery powered version (up to 10 years) an external DC power, alternatively with or without display connectable to many SCADA system or data logger.
The HydrINS 2 has the same measurement characteristics than the hydrINS range : reliable up to 2cm/s ; ± 2% of the value or ± 2mm/s, perfect tool for night flow measurements and leakage survey.
The IDU comes with a large LCD display with programmable alarms, pulse and Winfluid interfoced 4-20mA outputs depending on options.

  Insertion flowmeter    HydrINS 2          

The electomagnetic HydrINS 2 Insertion Flowmeter uses advanced processing tecnhiques with on board micro-controller which enables a wide variety of sampling regimes to be set, like signal quality, to suit a wide variety of applications (tanks, pumping, drinking water network, raw water).
Ease of installation with hot-tap capability, the same unit can be fit on a wide range of pipe sizes (from 100 to 8000 mm).It can be set up for permanent or temporary application diagnosis.
2 versions : self contained with or without display (over 10 years life depending on options) or powered version via its display.
Its large measurement range (from 2cm/s to 5m/s) and its accuracy of ± 2% enables accuracy and minimum night flow monitoring winfluid interfaced

  Diameter gauge                    

Diameter gauge is a tool to accurately measure a pipe’s internal diameter. Available with an internal DN 25mm/external DN 33mm and with an internal DN 41mm/external DN 47mm, it is suitable for all models of valves

Flowmeter with external sensors

  Transit time flowmeter    ChronoFLO     

HYDREKA’s range of Transit Time Ultrasonic Flowmeters use advanced complete coded signal digital correlation processing techniques to achieve stable measurements even in difficult conditions (drinking water and effluents).
The same core processing electronics are used in a number of different configurations to suit a wide range of applications. These configurations include Portable and Permanent control units, transducers with mounting arrangements for a wide range of pipe sizes (19 to 2000 mm ), digital and analogue inputs, outputs for process control.
This new technology allows to do away with zero adjustment.
The flowmeter can be set up and downloaded with Winfluid.

   Fire Hydrant flowmeter           

Created on the basis of meter (Woltex type), this flowmeter allows you to control flows and pressures on fire columns and hydrants.

It is provided with :

- LCD displays the instantaneous flow and flow totals in cubic meters,
- manometer with oil
- two connectors symmetric to the bolt

Electromagnetic flowmeter

  Self contained flowmeter                

This flowmeter is designed to record on drinking water pipe systems. Perfectly suitable for sites without external power, it offers more than 5 years of battery life.
Its specification such as its waterproofness (sensor and IP 68 transducer), facilitates the setting up and does not require a measure manhole.
Bi-directional measurement of flow velocity makes it possible to set up on the pipe systems providing an alimentation and a distribution.

   Externally powered flowmeter               

This flowmeter is designed to record in the consumption from drinking water networks. Waterproof (IP 68 sensor) facilitates it’s installation and makes unnecessary a measure chamber.
A bi-directional measurement of flow velocity allow it to be set up on pipe systems providing alimentation and distribution.
It’s large measurement range and its accuracy to +/-0,15 % offer high quality measures for   flows and for night flows.
This flowmeter is provided with 2 pulse outputs (forward and backward) and with a 4-20 mA output (forward).